Authentic Amish Products
Made in America!
| View Cart | Checkout |
shopkeeper@amishshop.com
| Amish
Pleasures Authentic Amish Products Made in America! |
Tel: 484-722-8259 | shopkeeper@amishshop.com |
| ***Most birdfeeders ship within a few days of your order but at this busy time some may take up to 5 weeks before shipping. Each birdfeeder is custom-made by hand; a process that often begins at the time of your order. Your patience is appreciated.*** |
Large Arched White Feeder
with Double Copper Roof
This Large Arched White Feeder has a double copper clad roof. The top portion of the roof is hinged so you can fill the storage compartment with up to 12 pounds of feed. Constructed of weather-proof treated plywood which is given a generous coat of weather-resistant white ZAR Rain Stain. A mounting bracket for your 4"x4" post completes this deluxe feeder. The size is 24" High x 20" Wide at the roofline. The
bottom is 16" wide. |
Round
Birdfeeder with Copper Roof This beautiful Round Birdfeeder holds six pounds of feed. Constructed using pine which is given a generous coat of weather-resistant white ZAR Rain Stain. The standing seam copper roof (16-gauge) is topped with a decorative lathe turned finial. Complete with a mounting bracket for your 4" x 4" post. The size is 20" high x 19" wide at roof, bottom is 14" wide. Round Birdfeeder with Copper Roof. Offered at $199 Includes Shipping |
Small Arch White
Feeder with Copper Roof
 This Small Arch White Feeder with a copper clad roof is constructed of weather-proof treated plywood which is given a generous coat of weather-resistant white ZAR Rain Stain - the finial, too. Complete with a mounting bracket for your 4" x 4" post. The size is 20" H x 14" W. Note: The finial is not as pictured. It is white. Small Arch White
Feeder with Copper Roof
$169
Includes Shipping |
 Large Arched White Feeder Shown with Patina Roof. Add Instant Patina Here (Original without Patina is pictured at far left of this row) It takes years for copper to get that blue-green tinge known as patina. Now you can get the weatherworn look of aged copper without the long wait. Simply add Instant Patina to any copper-roofed birdhouse (except where noted) and the patina-enhanced look will be locked in place with three coats of durable clear outdoor lacquer. Order Instant Patina for only $20. Available on all coppertop birdfeeders except where noted. |
|
Jumbo Cedar Feeder with Copper Roof
 The Jumbo Cedar Feeder has a triple copper clad roof which is hinged for access to the feed storage compartment. The feeder is constructed using cedar wood and holds 35 pounds of seed. A mounting bracket for your 6" x 6" post is included. The size is 34" High x 32" Wide.
Jumbo Cedar Feeder with Copper Roof $619 Includes Shipping |
Small Birdfeeder
with Spindles and Copper Roof
 This Small Bird Feeder with Spindles and Copper Roof is constructed of solid pine and barn siding that is given a generous coat of weather-resistant Zar Rain white stain to ensure years of lasting beauty. The standing seam copper roof (16-gauge) is topped with a decorative lathe-turned finial. The spindles and colonial styling allows for easy viewing of birds. The feeder comes with a mounting bracket for your 4" x 4" post. Size is 22" H x 14" W. A beautiful addition to any yard!
|
Small Hanging Birdfeeder with Spindles and Copper Roof
 This Small Hanging Bird Feeder with Spindles and Copper Roof is constructed of solid pine and barn siding that is given a generous coat of weather-resistant Zar Rain white stain to ensure years of lasting beauty. The standing seam copper roof (16-gauge) is topped with a decorative lathe-turned finial. The spindles and colonial styling allows for easy viewing of birds. The feeder comes with chains for hanging. Size is 22" H x 14" W. A beautiful addition to any yard!
|
Large
Arch Feeder
Natural Finish
with Double Copper Roof
 This Large Arch Feeder Natural with a double copper clad roof has a natural finish. The top portion of the roof is hinged so you can fill the storage compartment with up to 12 pounds of feed. Constructed of weather-proof treated plywood. A mounting bracket for your 4"x4" post completes this deluxe feeder. The size is 24" High x 20" Wide at roofline, and the bottom is 16" wide.
Large
Arch Feeder
Natural Finish
with Double Copper Roof
$249
Includes Shipping |
|
Large Bell-Shaped
Copper Roof
Birdfeeder
 This Large bell-shaped copper roof bird feeder is made of all poly lumber and stainless steel fasteners. Poly lumber is a maintenance-free product, built to last a lifetime! It will not splinter, crack, or fade and needs no painting. It is environmentally friendly and made from recycled material. The bird feeders are designed to sit on a 4 x 4 post (not included). The bell-shaped roof lifts off to allow easy filling. 36" H x 16" W. Instant Patina Not Available for this Feeder. |
Small Bell-Shaped Copper Roof
Birdfeeder
 This Small bell-shaped copper roof bird feeder is made of all poly lumber and stainless steel fasteners. Poly lumber is a maintenance-free product, built to last a lifetime! It will not splinter, crack, or fade and needs no painting. It is environmentally friendly and made from recycled material. The bird feeders are designed to sit on a 4 x 4 post (not included). The bell-shaped roof lifts off to allow easy filling. 29" H x 12" W. Instant Patina Not Available for this Feeder. |
 This Square Vinyl Bird Feeder with Four Columns and Copper Roof is constructed using long-lasting Maintenance-free Azek (vinyl) and heavy 16-gauge copper to ensure years of lasting beauty. The feeder comes with a mounting bracket for your 4" x 4" post. Holds approx. 6 lbs. of seed. A beautiful addition to any yard! Size is 27" H x 12" W at roofline and 10" W at bottom.
|
 The Large Gazebo Birdhouse is constructed with treated lumber. The roof is 1/2" treated plywood covered with cedar shingles. Painted with an exterior grade white paint. Dimensions: 16" D x 20" H. Mounting bracket included so it's ready for your wooden 4" x 4" post. Large White Gazebo Bird Feeder $199.95 |
Birdfeeder
with Spindles and Cedar
Roof  Our Birdfeeder with Spindles and Cedar Roof is constructed of 3/4" pressure-treated wood and has a cedar shake roof. A mounting bracket for your 4" x 4" post is included. Available Painted White or Natural (not painted) finish. Two Sizes: Small = 16" H x 13" W Large = 20" H x 16" W Note: May take up to 5 weeks before shipping. Sorry, this Birdfeeder is temporarily out of stock due to a shortage of materials. Please email us if you want to be put on a waiting list and we will contact you when this Birdhouse becomes available. Small Feeder with Spindles and Cedar Roof Natural $149 Small Feeder with Spindles and Cedar Roof Painted White $169 Large Feeder with Spindles and Cedar Roof Natural $175 Large Feeder with Spindles and Cedar Roof Painted White $195 |
Small Hanging Birdfeeder
with Spindles and Cedar Roof
Our Small Hanging Birdfeeder
with Spindles and Cedar
Roof is constructed of 3/4" pressure-treated wood and has a cedar shake
roof. It is
designed to be hung from the built-in chains. Available Painted White or Natural Finish. Note: May take up to 5 weeks before shipping. Sorry, this Birdfeeder is temporarily out of stock due to a shortage of materials. Please email us if you want to be put on a waiting list and we will contact you when this Birdhouse becomes available. Small Hanging Feeder with Spindles and Cedar Roof Natural Finish $149
Small Hanging Feeder with Spindles and Cedar Roof Painted White $169 |
Red Barn Hanging Birdfeeder
The Red Barn Hanging Birdfeeder is made using SmartPanel and covered with exterior-grade paint so it is highly resistant to the weather. Add feed through the cupola which lifts off. Holds 10 lbs. of feed. Clear Plexiglass on each side. Size is 15" L x 10" W x 13.5" H.
The Red Barn Hanging Birdfeeder $129 Shipping Included |
Covered Bridge Birdfeeder
 
Size Approx.: 32"L x 10"W
x 15"H
|
Size Approx.: 21"L x 14"W x 15"H
|
23.5" L x 17.5" W x
19" H Barn with Silo Feeder
$229 Shipping Included
|
||
20"L x 14.5"W x 20"H
The
Lighthouse Bird Feeder/Birdhouse combo is very unique and makes the perfect addition for
any backyard or porch. A clear-coat waterproof sealer has been applied
for long lasting protection. The Lighthouse feeder also features a small birdhouse at its base. |
22"L x 19"W x 16"H
The Western Barn Bird Feeder is very unique and makes the perfect addition for any backyard or porch. A clear-coat waterproof sealer has been applied for long lasting protection.
|
As of
05/05/2021 All Bird-Shaped Feeders have a 3-4 week lead time
before shipping.
Blue Jay-Shaped Birdfeeder  The artistically hand-painted Look Alike Hanging Birdfeeder has an uncanny likeness to the very bird that may be attracted to it. This feeder is made using 3/4" and 7/8" white pine and given a generous coating of quality exterior paint . Three slits in the bottom allow for drainage. The front of each feeder has 1/4" x 1/4" galvanized hardware wire mesh. Each feeder holds approximately four (4) pounds of feed. To add feed simply lift the beak and the head moves back on a stainless steel hinge revealing a 2-1/8" fill hole. A white cord (not shown) is attached for hanging from your favorite spot. Size is 25" H x 7" Depth x 6" W. |
As of
05/05/2021 All Bird-Shaped Feeders have a 3-4 week lead time
before shipping. Cardinal-Shaped Birdfeeder  The artistically hand-painted Look Alike Hanging Birdfeeder has an uncanny likeness to the very bird that may be attracted to it. This feeder is made using 3/4" and 7/8" white pine and given a generous coating of quality exterior paint . Three slits in the bottom allow for drainage. The front of each feeder has 1/4" x 1/4" galvanized hardware wire mesh. Each feeder holds approximately four (4) pounds of feed. To add feed simply lift the beak and the head moves back on a stainless steel hinge revealing a 2-1/8" fill hole. A white cord (not shown) is attached for hanging from your favorite spot. Size is 25" H x 7" Depth x 6" W. Cardinal Feeder $59 |
|
As of
05/05/2021 All Bird-Shaped Feeders have a 3-4 week lead time
before shipping. Chickadee-Shaped Birdfeeder  The artistically hand-painted Look Alike Hanging Birdfeeder has an uncanny likeness to the very bird that may be attracted to it. This feeder is made using 3/4" and 7/8" white pine and given a generous coating of quality exterior paint . Three slits in the bottom allow for drainage. The front of each feeder has 1/4" x 1/4" galvanized hardware wire mesh. Each feeder holds approximately four (4) pounds of feed. To add feed simply lift the beak and the head moves back on a stainless steel hinge revealing a 2-1/8" fill hole. A white cord (not shown) is attached for hanging from your favorite spot. Size is 14" H x 6" W. Chickadee Feeder $59 |
As of
05/05/2021 All Bird-Shaped Feeders have a 3-4 week lead time
before shipping. Woodpecker-Shaped Birdfeeder  The artistically hand-painted Look Alike Hanging Birdfeeder has an uncanny likeness to the very bird that may be attracted to it. This feeder is made using 3/4" and 7/8" white pine and given a generous coating of quality exterior paint . Three slits in the bottom allow for drainage. The front of each feeder has 1/4" x 1/4" galvanized hardware wire mesh. Each feeder holds approximately four (4) pounds of feed. To add feed simply lift the beak and the head moves back on a stainless steel hinge revealing a 2-1/8" fill hole. A white cord (not shown) is attached for hanging from your favorite spot. Size is 25" H x 7" Depth x 6" W. Woodpecker Feeder $59 |
As of
05/05/2021 All Bird-Shaped Feeders have a 3-4 week lead time
before shipping. Goldfinch-Shaped Birdfeeder  The artistically hand-painted Look Alike Hanging Birdfeeder has an uncanny likeness to the very bird that may be attracted to it. This feeder is made using 3/4" and 7/8" white pine and given a generous coating of quality exterior paint . Three slits in the bottom allow for drainage. The front of each feeder has 1/4" x 1/4" galvanized hardware wire mesh. Each feeder holds approximately four (4) pounds of feed. To add feed simply lift the beak and the head moves back on a stainless steel hinge revealing a 2-1/8" fill hole. A white cord (not shown) is attached for hanging from your favorite spot. Size is 25" H x 7" Depth x 6" W. Goldfinch Feeder $59 |
As of
05/05/2021 All Bird-Shaped Feeders have a 3-4 week lead time
before shipping. Bluebird-Shaped Birdfeeder  The artistically hand-painted Look Alike Hanging Birdfeeder has an uncanny likeness to the very bird that may be attracted to it. This feeder is made using 3/4" and 7/8" white pine and given a generous coating of quality exterior paint . Three slits in the bottom allow for drainage. The front of each feeder has 1/4" x 1/4" galvanized hardware wire mesh. Each feeder holds approximately four (4) pounds of feed. To add feed simply lift the beak and the head moves back on a stainless steel hinge revealing a 2-1/8" fill hole. A white cord (not shown) is attached for hanging from your favorite spot. Size is 25" H x 7" Depth x 6" W. |
|
As of
05/05/2021 All Bird-Shaped Feeders have a 3-4 week lead time
before shipping. Eagle-Shaped Birdfeeder  The artistically hand-painted Look Alike Hanging Birdfeeder has an uncanny likeness to the very bird that may be attracted to it. This feeder is made using 3/4" and 7/8" white pine and given a generous coating of quality exterior paint . Three slits in the bottom allow for drainage. The front of each feeder has 1/4" x 1/4" galvanized hardware wire mesh. Each feeder holds approximately four (4) pounds of feed. To add feed simply lift the beak and the head moves back on a stainless steel hinge revealing a 2-1/8" fill hole. A white cord (not shown) is attached for hanging from your favorite spot. Size is 25" H x 7" Depth x 6" W. Eagle Feeder $59 |
As of
05/05/2021 All Bird-Shaped Feeders have a 3-4 week lead time
before shipping. Raven-Shaped Birdfeeder  The artistically hand-painted Look Alike Hanging Birdfeeder has an uncanny likeness to the very bird that may be attracted to it. This feeder is made using 3/4" and 7/8" white pine and given a generous coating of quality exterior paint . Three slits in the bottom allow for drainage. The front of each feeder has 1/4" x 1/4" galvanized hardware wire mesh. Each feeder holds approximately four (4) pounds of feed. To add feed simply lift the beak and the head moves back on a stainless steel hinge revealing a 2-1/8" fill hole. A white cord (not shown) is attached for hanging from your favorite spot. Size is 25" H x 7" Depth x 6" W. |
As of
05/05/2021 All Bird-Shaped Feeders have a 3-4 week lead time
before shipping. Oriole-Shaped Birdfeeder  The artistically hand-painted Look Alike Hanging Birdfeeder has an uncanny likeness to the very bird that may be attracted to it. This feeder is made using 3/4" and 7/8" white pine and given a generous coating of quality exterior paint . Three slits in the bottom allow for drainage. The front of each feeder has 1/4" x 1/4" galvanized hardware wire mesh. Each feeder holds approximately four (4) pounds of feed. To add feed simply lift the beak and the head moves back on a stainless steel hinge revealing a 2-1/8" fill hole. A white cord (not shown) is attached for hanging from your favorite spot. Size is 25" H x 7" Depth x 6" W. Oriole Feeder $59 |
As of
05/05/2021 All Bird-Shaped Feeders have a 3-4 week lead time
before shipping.
Hummingbird-Shaped Birdfeeder  The artistically hand-painted Look Alike Hanging Birdfeeder has an uncanny likeness to the very bird that may be attracted to it. This feeder is made using 3/4" and 7/8" white pine and given a generous coating of quality exterior paint . Three slits in the bottom allow for drainage. The front of each feeder has 1/4" x 1/4" galvanized hardware wire mesh. Each feeder holds approximately four (4) pounds of feed. To add feed simply lift the beak and the head moves back on a stainless steel hinge revealing a 2-1/8" fill hole. A white cord (not shown) is attached for hanging from your favorite spot. Size is 25" H x 7" Depth x 6" W. |
|
As of
05/05/2021 All Bird-Shaped Feeders have a 3-4 week lead time
before shipping. Sea Gull-Shaped Birdfeeder  The artistically hand-painted Look Alike Hanging Birdfeeder has an uncanny likeness to the very bird that may be attracted to it. This feeder is made using 3/4" and 7/8" white pine and given a generous coating of quality exterior paint . Three slits in the bottom allow for drainage. The front of each feeder has 1/4" x 1/4" galvanized hardware wire mesh. Each feeder holds approximately four (4) pounds of feed. To add feed simply lift the beak and the head moves back on a stainless steel hinge revealing a 2-1/8" fill hole. A white cord (not shown) is attached for hanging from your favorite spot. Size is 25" H x 7" Depth x 6" W. Sea Gull Feeder $59 |
As of
05/05/2021 All Bird-Shaped Feeders have a 3-4 week lead time
before shipping. Rooster-Shaped Birdfeeder  The artistically hand-painted Look Alike Hanging Birdfeeder has an uncanny likeness to the very bird that may be attracted to it. This feeder is made using 3/4" and 7/8" white pine and given a generous coating of quality exterior paint . Three slits in the bottom allow for drainage. The front of each feeder has 1/4" x 1/4" galvanized hardware wire mesh. Each feeder holds approximately four (4) pounds of feed. To add feed simply lift the beak and the head moves back on a stainless steel hinge revealing a 2-1/8" fill hole. A white cord (not shown) is attached for hanging from your favorite spot. Size is 25" H x 7" Depth x 6" W. Rooster Feeder $59 |
As of
05/05/2021 All Bird-Shaped Feeders have a 3-4 week lead time
before shipping. Owl-Shaped Birdfeeder  The artistically hand-painted Look Alike Hanging Birdfeeder has an uncanny likeness to the very bird that may be attracted to it. This feeder is made using 3/4" and 7/8" white pine and given a generous coating of quality exterior paint . Three slits in the bottom allow for drainage. The front of each feeder has 1/4" x 1/4" galvanized hardware wire mesh. Each feeder holds approximately four (4) pounds of feed. To add feed simply lift the beak and the head moves back on a stainless steel hinge revealing a 2-1/8" fill hole. A white cord is attached for hanging from your favorite spot. Size is 25" H x 7" Depth x 6" W. Owl Feeder $59 |
As of
05/05/2021 All Bird-Shaped Feeders have a 3-4 week lead time
before shipping. Cow-Shaped Birdfeeder  The artistically hand-painted Look Alike Hanging Birdfeeder is our Cow feeder which is made using 3/4" and 7/8" white pine and given a generous coating of quality exterior paint . Three slits in the bottom allow for drainage. The front of each feeder has 1/4" x 1/4" galvanized hardware wire mesh. Each feeder holds approximately four (4) pounds of feed. To add feed simply lift the head and it moves back on a stainless steel hinge revealing a 2-1/8" fill hole. A white cord is attached for hanging from your favorite spot. Size is 25" H x 7" Depth x 6" W. Cow Feeder $59 |
